Shower Repair in Kissimmee, FL — Leaks, Valves & Low Pressure

💧 Dripping Showerhead

A showerhead that drips after you turn it off wastes water and can indicate valve problems. Often caused by worn washers, cartridge failure, or mineral buildup. We diagnose the cause and fix it properly.

🔧 Leaking Shower Valve

Water leaking from behind the handle, inside the wall, or from the valve body itself. This is a serious issue that causes hidden water damage. We repair or replace valves and address any resulting damage.

🌡️ No Hot Water or Temperature Problems

Shower won’t get hot, won’t stay hot, or temperature fluctuates wildly. Could be a valve cartridge issue, crossover problem, or water heater issue. We diagnose whether it’s the shower or a whole-house problem.

🚿 Low Water Pressure

Weak flow that makes rinsing difficult. Often caused by clogged showerhead, mineral deposits in the valve, partially closed shutoff, or corroded pipes. We identify the restriction and restore full pressure.

💦 Leaking Shower Pan or Base

Water appearing on the ceiling below or around the base of the shower. Usually indicates a failed pan liner, cracked base, or drain connection problem. We locate the leak source and repair it properly.

🔌 Slow or Clogged Drain

Water pooling at your feet or draining slowly. Hair, soap scum, and debris accumulate over time. We clear the clog and can install drain covers that prevent future buildup.

🧱 Cracked Grout or Failed Caulk

Gaps in grout lines or peeling caulk let water behind tile, causing hidden damage. We remove old grout/caulk, address any moisture damage, and reseal properly to prevent future problems.

🪨 Loose or Cracked Tiles

Tiles that move, sound hollow, or have cracks indicate water intrusion or adhesion failure. We replace damaged tiles, assess the substrate for moisture damage, and waterproof properly.

🦠 Mold or Mildew Growth

Black spots in grout, on caulk, or spreading on walls indicate moisture problems. We address the source of excess moisture, repair affected areas, and use mold-resistant materials to prevent recurrence.

🎛️ Broken Handles or Fixtures

Handles that spin freely, won’t turn, or have broken off. Showerheads that leak at the arm connection. Diverters that won’t switch between tub and shower. We repair or replace all shower hardware.

How do I know if my shower is leaking behind the wall?

Signs include: water stains or bubbling paint on walls near the shower, musty smell in the bathroom, soft or spongy spots in flooring, water damage on the ceiling below (if upstairs bathroom), or visible mold growth. If you notice any of these, call for an inspection promptly.

Why does my shower go cold when someone flushes a toilet?

This happens when your shower valve lacks pressure balancing. Older valves don’t compensate for pressure changes when other fixtures use water. We can install a pressure-balance or thermostatic valve that maintains consistent temperature regardless of other water use in the house.

Can you match my existing tile for repairs?

We try our best. If your tile is still available, we can source matching tiles. If it’s discontinued, we look for close matches or can suggest accent tile that complements your existing tile. In some cases, using the same tile in a different location (like behind the toilet) and putting new tile in the visible repair area works well.

How long does shower repair take?

Simple repairs like cartridge replacement or showerhead installation take 1-2 hours. Valve replacement requiring wall access takes 3-4 hours. Tile and grout work may require multiple visits to allow for curing time. We’ll give you a timeline estimate during the assessment.

My shower drips only occasionally—is that still a problem?

Yes. Intermittent dripping still wastes water and indicates a valve problem that will worsen over time. It’s easier and cheaper to fix now than to wait until it becomes constant or the valve fails completely. An occasional drip is your shower telling you it needs attention.

Do you repair fiberglass and acrylic shower units?

We can repair minor issues like caulk replacement and drain problems. However, cracks in fiberglass or acrylic units can’t be reliably repaired long-term—they tend to spread. For cracked prefab units, we typically recommend replacement rather than patching.